Industrial warehouse racking
Racking buy-back
Racking you no longer need is an asset until the day the lease ends, and then it becomes a clearance cost. Rejuva buys surplus systems across Europe, values them on condition and demand, dismantles and removes them, and can put quality second-hand racking back into another building rather than into a skip.
Turning surplus racking back into value
Operations change shape: sites consolidate, layouts modernise, a contract ends and the storage that came with it is suddenly in the way. The racking that served it is usually sound, often barely used, and almost never worth the space and the handling it goes on consuming while somebody decides what to do with it.
Rejuva buys that steel. The valuation is based on what it is, what condition it is in and what demand there is for it, and the removal is done by certified crews with the documentation and the site clearance included, so the transaction ends with a building you can hand back rather than with a floor full of components.
The same loop supplies the other side of the service: serviceable second-hand racking, which is often what makes a reconfiguration affordable and keeps usable steel in service instead of in a recycling stream.
How a buy-back works
-
Assessment
Photographs and specifications, or a site visit, covering the layout, the condition and the timescale you are working to.
-
Offer and agreement
A clear offer based on the type, the age, the condition and current demand, with a removal schedule that works around your operation.
-
Dismantling and removal
Taken down safely by certified crews, catalogued, loaded and removed, with the risk assessments and method statements the site requires.
-
Payment and confirmation
Settlement on the agreed terms, with traceable documentation for what left the site and where it went.
When it is worth selling
-
A site closing or a lease ending
Surplus racking costs money to keep from the moment it stops being used, in space, in insurance and in the labour of dealing with it later.
-
A relocation or a redesign
Racking that does not suit the new layout is better sold than moved, since the transport and reinstallation can easily exceed what it is worth.
-
Moving to a denser or automated system
The system being replaced often has years of life in it and can fund part of what replaces it.
-
Equipment that was only ever seasonal
Racking bought for a peak that has passed, which will not be needed again in the same form or the same building.
What we buy
No limit on brand, type or configuration. Custom and modified systems are assessed on their own terms.
-
Pallet racking
Adjustable beam racking, very narrow aisle systems and drive-in or drive-through configurations.
-
Cantilever racking
For long and irregular loads: timber, tube, bar and sheet.
-
Mezzanines and multi-tier shelving
Structures built to use the height of a building, dismantled as a structure rather than as parts.
-
Shelving
Boltless and wide-span shelving from light industrial use, workshops and back-of-store areas.
-
Custom systems
Modified or purpose-built racking, valued individually on condition, structure and what it could serve next.
Sell, hire or repair?
Buy-back is not always the answer, and it is worth saying so before a survey rather than after one. A short lease ending usually points to buy-back, or to removal alongside a hire that covers the gap. Waiting on capital expenditure points to hire with a staged transition instead. An upgrade is best handled as removal and new installation in one project. A fast clear-out is buy-back with floor reinstatement attached.
And if the racking is only damaged rather than surplus, none of the above applies: it is a repair, which restores compliance for a fraction of what replacing the run would cost.
Why bring Rejuva in
-
One coordinator
One person from the first valuation to the final collection, rather than a call centre and a series of handovers.
-
Valued on what it is
Condition, quantity and real demand, set out openly, with no deductions appearing at the end.
-
Removal that does not stop the site
Phased around the operation, including end-of-lease work where the building has to be handed back clear.
-
Compliant disposal and reuse
Work in line with EN 15635 and ISO 45001, and the WEEE Directive where it applies, with proof of where things went.
-
The site put back
Floor cleaning, grinding and reinstatement available with the removal, which is usually what the lease actually requires.
-
Trade-in against new
Credit set against a new installation or a hire, which is what makes a reconfiguration land inside a budget.
Frequently asked questions about racking buy-back
What do you need in order to quote?
The type of racking, the dimensions, roughly how much of it there is, its age and condition, and clear photographs. If the specifications are not to hand, a site visit does the same job.
Do you buy partial systems or small quantities?
Yes, both. Smaller quantities are assessed case by case, since what governs them is the location and the cost of getting a crew there as much as the steel itself.
Can racking still in use be dismantled?
Yes. Removals are phased around the operation, or scheduled for the end of a lease, so the areas still trading keep trading while the surplus comes out.
What if the system is damaged or incomplete?
It is still worth assessing. Missing or damaged components reduce the value rather than rule it out, since a good deal of what comes back is repairable and much of the rest has salvage value.
Can we trade old racking against new?
Yes. Trade-in credit can be set against a new installation or against a hire, which is usually the cleanest way to fund a reconfiguration.
Racking services, from first survey to buy-back
Racking is not only bought. It has to be installed to the design, inspected while it is in use, repaired when it is hit, and moved or sold when the operation changes.
Racking systems we design and install
Every system sits somewhere on one trade-off: selectivity, meaning you can reach any pallet at any time, against density, meaning how many pallets fit into the same floor area.
Have a project in mind?
Describe what needs to happen in the building and we will come back with a proposed approach, the specialist who would carry it out and a budget you can work with.